5 Configuration D-Link DGS-1100-06/ME User Manual
38
Figure 5.54 - Configuration > IGMP Snooping > ISM VLAN Settings
ISM VLAN Global State: Enable or disable the IGMP Snooping Multicast (ISM) VLAN Global State.
Click Apply button to confirm the ISM VLAN Global State.
VID: Add the corresponding VLAN ID of the Multicast VLAN. Users may enter a value between 2 and 4094.
State: Use the drop-down menu to enable or disable the selected Multicast VLAN.
Member Ports: Enter a port or list of ports to be added to the Multicast VLAN. Member ports shall be the
untagged members of the multicast VLAN.
Tagged Member Ports: Enter a port or list of ports that will become tagged members of the Multicast VLAN.
VLAN Name: Enter the name of the new Multicast VLAN to be created. This name can be up to 32
characters in length.
IPv4 Replace Source: This field is used to replace the source IPv4 address of incoming packets sent by the
host before being forwarded to the source port.
IPv6 Replace Source IP: This field is used to replace the source IPv6 address of incoming packets sent by
the host before being forwarded to the source port.
Source Ports: Enter a port or list of ports to be added to the Multicast VLAN. Source ports shall be the
tagged members of the multicast VLAN.
Click Add to add the ISM VLAN which will appear in the table, or click Clear All to clear all fields.
Click Edit button to modify the parameters and update the ISM VLAN Setting or click Delete to delete the
ISM VLAN.
Click View to display the detail information of ISM VLAN.
Figure 5.55 - Configuration > IGMP Snooping > ISM VLAN Settings
Multicast Address: Select IPv4 or IPv6 and specify the IP address.
Click Add to create a new entry, click Delete All to remove all entries.
Configuration > IGMP Snooping > Host Table
The Host Table page displays the information of Host Table. Including VLAN ID, Group, Port Number and
Host IP.
Figure 5.56 - Configuration > IGMP Snooping > Host Table
To Next Page
Loading...
