D-Link DGS-1100 MP/MPP Series Switch User Manual
42
SNTP State Set the SNTP state. Options are Enabled or Disabled.
Pool Interval (30-99999)
Set the synchronization interval for SNTP. The default is 720
seconds and the range is 30 – 99999 seconds.
Click the Apply button to accept the changes made.
The fields that can be configured for the SNTP Server Setting are described below:
Parameter Description
IPv4 Address
Enter the IP address of the SNTP server you would like to
synchronize with.
Click the Apply button to accept the changes made.
To Next Page
Loading...
