D-Link DGS-1100-10MP - Uplink Port Configuration

D-Link DGS-1100 MP/MPP Series Switch User Manual
45
NOTE: It is highly recommended that only uplink ports are connected to other
switches, as the IP-Camera discovery process is disabled on these ports. Use the
Uplink Port Settings section of the interface to define which ports connect to other
switches.
NOTE: The default uplink ports of the DGS-1100-
10MP/10MPP are port9 and
port10. The default uplink ports of DGS-1100-26MP/26MPP are port25 and port26.