D-Link DGS-1100-24P - Page 47

D-Link DGS-1100 Series Switch User Manual
Click the View Detail button to view more detailed information about the VLAN on the specific
interface.
Click the Edit button to re-configure the specific entry.
After clicking the VLAN Detail button, the following page will appear.
Figure 7-11 VLAN Interface Information window
More detailed information about the VLAN of the specific interface is displayed.
Click the Back button to return to the previous window.
After click the Edit button, the following window will appear. This is a dynamic window that will
change when a different VLAN Mode was selected. When Access was selected as the VLAN Mode,
the following page will appear.
Figure 7-12 Configure VLAN Interface - Access window
The fields that can be configured are described below:
Parameter Description
VLAN Mode
Select the VLAN mode option here. Options to choose from
are Access, Hybrid, and Trunk.
Acceptable Frame
Select the acceptable frame behavior option here. Options to
choose from are Tagged Only, Untagged Only, and Admit
All.
Ingress Checking
Select this option to enable or disable the ingress checking
function.
VID
Enter the VLAN ID used for this configuration here. This
value must be between 1 and 4094.
Click the Apply button to accept the changes made.
4
4
1
1