5 Surveillance Mode Configuration D-Link Smart Managed Switch User Manual
130
Figure 5.7 – Surveillance Mode > Port Information
IP-Camera Information
The IP-Camera Information page displays information on each camera connected to the switch. It features
the port number, device type, throughput, IP address and other information such as port description, power
consumption and location.
Figure 5.8 – Surveillance Mode > IP-Camera Information
NVR Information
The NVR Information page displays information on each NVR connected to the switch. It features the port
number, throughput, IP address and information relating to the cameras connected to the NVR, such as the
group name, total number of cameras and the port and IP address of each camera. Hover-over each field to
get more information about each value.
Figure 5.9 – Surveillance Mode > NVR Information
PoE Information
This page displays the Power-over-Ethernet(PoE) usage information of each port on the Switch. The port
number, PoE status, health status, PoE budget and power consumption is listed for each port. It is possible
to click on the health status to be re-directed to the Health Diagnostic page. Hover-over each field to get
more information about each value.
To Next Page
Loading...
