4 Web-based Switch Configuration D-Link Smart Managed Switch User Manual
1
1
2
2
5
5
Figure 4.165 – Monitoring > System Log
ID: Displays an incremented counter of the System Log entry. The Maximum entries are 500.
Time: Displays the time in days, hours, and minutes the log was entered.
Log Description: Displays a description event recorded.
Severity: Displays a severity level of the event recorded.
Click Refresh to renew the page, and click Clear to clean out all log entries.
Note: The system logs will be reset and won’t be saved
after the switch reboots.
Monitoring > Ping Test
“Ping” is the method to measure the minimum time needed to specified destination.
Figure 4.166 – Monitoring > Ping Test
Target IP Address: Selectable address mode from IPv4, IPv6 or Domain Name.
Repeat Pinging for: Configurable value from 1-255 times or Infinite times.
Timeout: Configurable timeout value from 1-99 seconds..
To Next Page
Loading...
