D-Link DGS-1210/ME series - Enable Snmp LBD Traps; Disable Snmp LBD Traps; Enable Snmp Port_Security_Violation Traps

DGS-1210/ME Metro Ethernet Switch CLI Reference Guide
117
Success.
DGS-1210-28MP/ME:5#
enable snmp LBD traps
Purpose To enable SNMP LBD traps.
Syntax
enable snmp LBD traps
Description
The enable snmp LBD traps command enables SNMP LBD traps
support on the Switch.
Parameters None.
Restrictions Only Administrator or operator-level users can issue this command.
Example usage:
To enable SNMP LBD traps support on the Switch:
DGS-1210-28MP/ME:5# enable snmp LBD traps
Command: enable snmp LBD traps
Success.
DGS-1210-28MP/ME:5#
disable snmp LBD traps
Purpose To disable SNMP LBD traps.
Syntax
disable snmp LBD traps
Description
The disable snmp LBD traps command disables SNMP LBD traps
support on the Switch.
Parameters None.
Restrictions Only Administrator or operator-level users can issue this command.
Example usage:
To disable SNMP LBD traps support on the Switch:
DGS-1210-28MP/ME:5# disable snmp LBD traps
Command: disable snmp LBD traps
Success.
DGS-1210-28MP/ME:5#
enable snmp port_security_violation traps
Purpose To enable SNMP port security violation traps.
Syntax
enable snmp port_security_violation traps
Description
The enable snmp port_security_violation traps command
enables SNMP port security violation traps on the Switch.