D-Link DGS-1210/ME series - Clear Counters; Save Log; Clear Log

DGS-1210 Metro Ethernet Managed Switch CLI Reference Guide
156
Five Seconds - 7 % One Minute - 6 % Five Minutes - 6 %
CPU Utilization :
-------------------------------------------------------------------------------
Five Seconds - 7 % One Minute - 6 % Five Minutes - 6 %
CTRL+C ESC q Quit SPACE n Next Page p Previous Page r Refresh
DGS-1210-28MP/ME:5#
clear counters
Purpose To clear the Switch’s statistics counters.
Syntax
clear counters{ports <portlist>}
Description
The clear counters command clears
the counters used by the
Switch to compile statistics.
Parameters
ports <portlist> - Specifies the counters of ports to be cleared.
Restrictions Only Administrator or operator-level users can issue this command.
Example usage:
To clear the counters:
DGS-1210-28MP/ME:5# clear counters
Success.
DGS-1210-28MP/ME:5#
save log
Purpose To save the Switch’s history log.
Syntax
save log
Description
The save log command saves the Switch’s history log.
Parameters None.
Restrictions Only Administrator or operator-level users can issue this command.
Example usage:
To save the log information:
DGS-1210-28MP/ME:5# save log
Command: save log
Success.
DGS-1210-28MP/ME:5#
clear log
Purpose To clear the Switch’s history log.