D-Link DGS-1210/ME series - Show Cos Mac_Mapping; Delete Cos Mac_Mapping

DGS-1210/ME Metro Ethernet Switch CLI Reference Guide
201
DGS-1210-28MP/ME:5# config cos mac_mapping destination_addr 00-01-c2-11-22-
33 class 2
Command: config cos mac_mapping destination_addr 00-01-c2-11-22-33 class 2
Success.
DGS-1210-28MP/ME:5#
show cos mac_mapping
Purpose To display the CoS MAC mapping method.
Syntax
show cos mac_mapping {destination_addr <macaddr>}
Description
The show cos mac_mapping command is used to display the CoS
MAC mapping method on the Switch.
Parameters
<macaddr> - Specifies the MAC address to be removed.
Restrictions None.
Example usage:
To display the CoS mac mapping on the Switch:
DGS-1210-28MP/ME:5# show cos mac_mapping
Command: show cos mac_mapping
MAC ADDRESS Class
---------------------------------------------------
00-01-C2-11-22-33 2
DGS-1210-28MP/ME:5#
delete cos mac_mapping
Purpose To remove the CoS MAC mapping method.
Syntax
delete cos mac_mapping destination_addr <macaddr>
Description
The delete cos mac_mapping command is used to delete the CoS
MAC mapping method on the Switch.
Parameters
<macaddr> - Specifies the MAC address to be removed.
Restrictions Only administrator or operator-level users can issue this command.
Example usage:
To delete the CoS mac mapping on the Switch:
DGS-1210-28MP/ME:5# delete cos mac_mapping destination_addr 00-01-c2-11-22-33
Command: delete cos mac_mapping destination_addr 00-01-c2-11-22-33
Success.
DGS-1210-28MP/ME:5#