D-Link DGS-1210/ME series - Show Mirror

DGS-1210/ME Metro Ethernet Switch CLI Reference Guide
233
show mirror
Purpose To show the current port mirroring configuration on the Switch.
Syntax
show mirror
Description
The show mirror
command displays the current port mirroring
configuration on the Switch.
Parameters None.
Restrictions None.
Example usage:
To display mirroring configuration:
DGS-1210-28MP/ME:5# show mirror
Command: show mirror
Port Mirror is enabled
Target Port : 3
Source Port : 2
Direction : Both
DGS-1210-28MP/ME:5#