D-Link DGS-1210/ME series - Create 802.1 X Guest_Vlan; Delete 802.1 X Guest_Vlan

DGS-1210 Metro Ethernet Managed Switch CLI Reference Guide
378
DGS-1210-28MP/ME:5# config 802.1x auth_mode port_based
Command: config 802.1x auth_mode port_based
Success.
DGS-1210-28MP/ME:5#
create 802.1x guest_vlan
Purpose Enables network access to a Guest VLAN.
Syntax
create 802.1x guest_vlan <vlan_name 32>
Description
The create 802.1x guest_vlan command enables network access
to a 802.1x Guest VLAN. A network administrator can use 802.1x
Guest VLANs to deny network access via port–based authentication,
but grant Internet access to unauthorized users.
Parameters
<vlan_name 32> − The name of the 802.1x Guest VLAN to be
created.
Restrictions Only Administrator or operator-level users can issue this command.
Example usage:
To create a 802.1x Guest VLAN:
DGS-1210-28MP/ME:5# create 802.1x guest_vlan default
Command: create 802.1x guest_vlan default
Success.
DGS-1210-28MP/ME:5#
delete 802.1x guest_vlan
Purpose Disables network access to a Guest VLAN.
Syntax
delete 802.1x guest_vlan <vlan_name 32>
Description
The delete 802.1x guest_vlan command disables network access
to a 802.1x Guest VLAN. A network administrator can use 802.1x
Guest VLANs to deny network access via port–based authentication,
but grant Internet access to unauthorized users.
Parameters None.
Restrictions Only Administrator or operator-level users can issue this command.
The user is required to disable Guest VLAN before deleting a
specific the VLAN.
Example usage:
To delete a 802.1x Guest VLAN