DGS-1250 Series Gigabit Ethernet Smart Managed Switch Web UI Reference Guide
118
LLDP-MED Port Settings
The LLDP-MED Port Settings page is used to enable or disable outbound LLDP advertisements for LLDP-MED TLVs.
To view the following window, click L2 Features > LLDP > LLDP-MED Port Settings, as shown below:
Figure 5-63 LLDP-MED Port Settings Window
The fields that can be configured are described below:
Parameter Description
From Port - To Port
Select the appropriate port range used for the configuration here.
Notification
Select this option to enable or disable transmitting the LLDP-MED notification
TLV.
Capabilities
Select this option to enable or disable transmitting the LLDP-MED capabilities
TLV.
Inventory Select this option to enable or disable transmitting the LLDP-MED inventory
management TLV.
Network Policy
Select this option to enable or disable transmitting the LLDP-MED network policy
TLV.
PSE
Select this option to enable or disable transmitting the LLDP-MED extended
power via MDI TLV, if the local device is PSE device or PD device.
Click the Apply button to accept the changes made.
To Next Page
Loading...
