DGS-1250 Series Gigabit Ethernet Smart Managed Switch Web UI Reference Guide
157
IPv6
After clicking the IPv6 radio button and the Next button, the following window will appear.
Figure 8-6 ACL Configuration Wizard (Create, Packet Type, IPv6) Window
The fields that can be configured are described below:
Parameter Description
Sequence No.
Enter the ACL rule number here. This value must be between 1 and 65535. Select
Auto Assign to automatically generate an ACL rule number for this entry.
Protocol Type Select the protocol type option here. Options to choose from are TCP, UDP,
ICMP, Protocol ID, ESP (50), PCP (108), SCTP (132), and None.
• Value - The protocol ID can also manually be entered here. The range is
from 0 to 255.
• Fragments - Select this option to include packet fragment filtering.
The fields that can be configured in Assign rule criteria are described below:
Parameter Description
Source
Select and enter the source information here. Options to choose from are Any,
Host, and IPv6.
• When the Any option is selected, any source traffic will be evaluated
according to the conditions of this rule.
•
When the Host option is selected, enter the source host IPv6 address here.
To Next Page
Loading...
