DGS-1510/ME Series Metro Ethernet Switch CLI Reference Guide
146
Parameters
None.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To enable the CFM globally:
DGS-1510-28XMP/ME:admin# enable cfm
Command: enable cfm
Success.
16-11 disable cfm
Description
This command is used to disable the CFM globally.
Format
disable cfm
Parameters
None.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To disable the CFM globally:
DGS-1510-28XMP/ME:admin# disable cfm
Command: disable cfm
Success.
16-12 config cfm ports
Description
This command is used to enable or disable the CFM function on a per-port basis. By default, the CFM function is
disabled on all ports.
To Next Page
Loading...
