DGS-1510/ME Series Metro Ethernet Switch CLI Reference Guide
269
<vlan_name 32> - Enter the VLAN name here. The VLAN name can be up to 32 characters long.
vlanid - (Optional) Specifies the ID of the VLAN for which you want to view IGMP snooping group information.
<vlanid_list> - Enter the VLAN ID list here.
ports - (Optional) Specifies a list of ports for which you want to view IGMP snooping group information.
<portlist> - Enter the list of ports here.
<ipaddr> - (Optional) Specifies the group IP address for which you want to view IGMP snooping group
information.
data_driven - (Optional) Specifies to only display data driven groups.
Restrictions
None.
Example
To show IGMP snooping groups when IGMP v3 is supported:
DGS-1510-28XMP/ME:admin# show igmp_snooping group
Command: show igmp_snooping group
Source/Group : 20.64.85.0/226.1.1.1
VLAN Name/VID : v103/103
Member Ports : 6
Router Ports : 8
UP Time : 7
Expiry Time : 253
Filter Mode : INCLUDE
Source/Group : 20.64.85.1/226.1.1.1
VLAN Name/VID : v103/103
Member Ports : 6
Router Ports : 8
UP Time : 7
Expiry Time : 252
Filter Mode : INCLUDE
Source/Group : 20.64.85.2/226.1.1.1
VLAN Name/VID : v103/103
Member Ports : 6
Router Ports : 8
UP Time : 7
Expiry Time : 252
Filter Mode : INCLUDE
Total Entries: 3
To Next Page
Loading...
