DGS-1510/ME Series Metro Ethernet Switch CLI Reference Guide
270
To show IGMP snooping data driven groups:
DGS-1510-28XMP/ME:admin# show igmp_snooping group data_driven
Command: show igmp_snooping group data_driven
Source/Group : NULL/226.1.1.1
VLAN Name/VID : v103/103
Member Ports :
Router Ports :
UP Time : 92
Expiry Time : 168
Filter Mode : EXCLUDE
Total Entries: 1
To show IGMP snooping groups when only IGMP v2 is supported: The third item is a data-driven learned entry. If
the member port list is empty, the multicast packets will be forwarded to the router ports. If the router port list is
empty, the packets will be dropped.
DGS-1510-28XMP/ME:admin# show igmp_snooping group
Command: show igmp_snooping group
Source/Group : NULL/226.1.1.1
VLAN Name/VID : v103/103
Member Ports : 6
Router Ports : 8
UP Time : 10
Expiry Time : 260
Filter Mode : EXCLUDE
Source/Group : NULL/226.1.1.2
VLAN Name/VID : v103/103
Member Ports : 6
Router Ports : 8
UP Time : 10
Expiry Time : 260
Filter Mode : EXCLUDE
Source/Group : NULL/226.1.1.3
VLAN Name/VID : v103/103
Member Ports :
Router Ports : 8
UP Time : 80
Expiry Time : 180
Filter Mode : EXCLUDE
Total Entries: 3
To Next Page
Loading...
