D-Link DGS-1510/ME Series - Show Mirror

DGS-1510/ME Series Metro Ethernet Switch CLI Reference Guide
372
DGS-1510-28XMP/ME:admin# disable mirror
Command: disable mirror
Success.
DGS-1510-28XMP/ME:admin#
44-4 show mirror
Description
This command is used to display the current mirror function state and mirror session configuration on the Switch.
Format
show mirror
Parameters
None.
Restrictions
None.
Example
To display mirroring configuration:
DGS-1510-28XMP/ME:admin# show mirror
Command: show mirror
Current Settings
Mirror Status: Enabled
Target Port : 3
Mirrored Port
RX: 7-12
TX: 7-12
DGS-1510-28XMP/ME:admin#