DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide
171
Figure 8-4 ACL Configuration Wizard (Add Rule for MAC ACL) window
The fields that can be configured are described below:
Parameter Description
Sequence No.
Enter the ACL rule number here. This value must be between 1 and
65535. Select Auto Assign to automatically generate an ACL rule
number for this entry.
Source
Select and enter the source information here. Options to choose from
are Any, Host, and MAC. When the Any option is selected, any
source traffic will be evaluated according to the conditions of this rule.
When the Host option is selected, enter the source host’s MAC
address here. When the MAC option is selected, the Wildcard option
will also be available. Enter the source MAC address and wildcard
value in the spaces provided.
Destination
Select and enter the destination information here. Options to choose
from are Any, Host, and MAC. When the Any option is selected, any
destination traffic will be evaluated according to the conditions of this
rule. When the Host option is selected, enter the destination host’s
MAC address here. When the MAC option is selected, the Wildcard
option will also be available. Enter the destination MAC address and
wildcard value in the spaces provided.
Specify Ethernet Type Select the Ethernet type option here. Options to choose from are aarp,
appletalk, decent-iv, etype-6000, etype-8042, lat, lavc-sca, mop-
console, mop-dump, vines-echo, vines-ip, xns-idp, and arp.
Ethernet Type
Enter the Ethernet type hexadecimal value here. This value must be
between 0x600 and 0xFFFF. When any Ethernet type profile is
selected in the Specify Ethernet Type drop-down list, the appropriate
To Next Page
Loading...
