DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide
308
Validation Select the validation method used here. Options to choose from are IP
and IP-MAC. Selecting IP means that the IP address of the received
packets will be checked. Selecting IP-MAC means that the IP address
and the MAC address of the received packets will be checked.
Click the Apply button to accept the changes made.
IP Source Guard Binding
This window is used to view and configure the IP source guard binding settings.
To view the following window, click Security > IMPB > IPv4 > IP Source Guard > IP Source Guard
Binding, as shown below:
Figure 9-49 IP Source Guard Binding window
The fields that can be configured for IP Source Binding Settings are described below:
Parameter Description
MAC Address
Enter the MAC address of the binding entry here.
VID
Enter the VLAN ID of the binding entry here.
IP Address
Enter the IP address of the binding entry here.
Unit
Select the switch unit that will be used for this configuration here.
From Port / To Port
Select the appropriate port range used for the configuration here.
Click the Apply button to accept the changes made.
The fields that can be configured for IP Source Binding Entry are described below:
Parameter Description
Unit
Select the switch unit that will be used for this query here.
From Port / To Port
Select the appropriate port range used for the query here.
To Next Page
Loading...
