DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide
341
Figure 9-80 CPU Protect Type window
The fields that can be configured for CPU Protect Type are described below:
Parameter Description
Protocol Name
Select the protocol name option here. Options to choose from are
DHCP, ARP, DNS, GVRP, ICMPv4, ICMPv6-Neighbor, ICMPv6-Other,
IGMP, LACP, SNMP, SSH, STP, Telnet, TFTP, Web, and 802.1X.
Rate Limit
Enter the rate limit value used here. This value must be between 0 and
1024 packets per second. Tick the No Limit option to disable the rate
limit.
Click the Apply button to accept the changes made.
The fields that can be configured for Protect Type Information are described below:
Parameter Description
Protocol Name
Select the protocol name option here. Options to choose from are
DHCP, ARP, DNS, GVRP, ICMPv4, ICMPv6-Neighbor, ICMPv6-Other,
IGMP, LACP, SNMP, SSH, STP, Telnet, TFTP, Web, and 802.1X.
Click the Find button to locate a specific entry based on the information entered.
Trusted Host
This window is used to view and configure the trusted host settings.
To view the following window, click Security > Trusted Host, as shown below:
Figure 9-81 Trusted Host window
The fields that can be configured are described below:
Parameter Description
ACL Name
Enter the ACL name used here. This name can be up to 32 characters
long.
To Next Page
Loading...
