D-Link DGS-3000 series - Page 42

DGS-3000 Series Gigabit Ethernet Switch Hardware Installation Guide
38
Feature
Description
listed below:
DGS-3000-10L: Fanless
DGS-3000-20L: Fanless
DGS-3000-28L: Fanless
DGS-3000-28LP: 2 Fans
DGS-3000-28X: 1 Fan
DGS-3000-28XMP: 2 Fans
DGS-3000-28XS: 2 Fans
DGS-3000-52L: 2 Fans
DGS-3000-52X: 2 Fans
Maximum Power Consumption
DGS-3000-10L: 13.0 Watts (100 V), 13.6 Watts (240 V)
DGS-3000-20L: 15.3 Watts (100 V), 15.6 Watts (240 V)
DGS-3000-28L: 17.5 Watts (100 V), 17.6 Watts (240 V)
DGS-3000-28LP: PoE off: 28.4 Watts (100 V), 26.7 Watts (240 V)
PoE on: 246.5 Watts (100 V), 233.5 Watts (240 V)
DGS-3000-28X: 21.4 Watts (100 V), 22.1 Watts (240 V)
DGS-3000-28XMP: PoE off: 30.9 Watts (100 V), 31.8 Watts (240 V)
PoE on: 445.2 Watts (100 V), 425.1 Watts (240
V)
DGS-3000-28XS: 53.38 Watts (100 V), 52.68 Watts (240 V)
DGS-3000-52L: 39 Watts (100 V), 37.1 Watts (240 V)
DGS-3000-52X: 42.8 Watts (100 V), 42 Watts (240 V)
Standby Power Consumption
DGS-3000-10L: 9.4 Watts (100 V), 9.6 Watts (240 V)
DGS-3000-20L: 9.8 Watts (100 V), 10.5 Watts (240 V)
DGS-3000-28L: 10.1 Watts (100 V), 10.6 Watts (240 V)
DGS-3000-28LP: 19.5 Watts (100 V), 19.0 Watts (240 V)
DGS-3000-28X: 13.2 Watts (100 V), 15.2 Watts (240 V)
DGS-3000-28XMP: 19.8 Watts (100 V), 20.4 Watts (240 V)
DGS-3000-28XS: 13.0 Watts (100 V), 13.5 Watts (240 V)
DGS-3000-52L: 22.7 Watts (100 V), 22.8 Watts (240 V)
DGS-3000-52X: 29.3 Watts (100 V), 29.2 Watts (240 V)
Optional RPS
Provides one connector in rear panel to install optional external RPS to
enhance the reliability. When the internal power fails, the optional
external RPS will take over all the power immediately and automatically.
Security Lock
Provides a Kensington-compatible security lock, on the rear of the
Switch, to be able to connect to a secure immovable device. Insert the
lock into the notch and turn the key to secure the lock. The lock-and-
cable apparatus should be purchased separately.
Real Time Clock (RTC)
Be able to maintain the time setting when the device power is off.
Reset Pinhole
A factory reset pinhole on the front panel of the Switch. After pressing
hardware reset button for 5 seconds, the switch will reset to the factory
default configuration.
Temperature
Operating: -5 °C ~ 50 °C (23 °F ~ 122 °F)
Storage: -20 °C ~ 70 °C (-4 °F ~ 158 °F)
Humidity
Operating: 0 % ~ 95 % (non-condensing)
Storage: 0 % ~ 95 % (non-condensing)
Dimensions
DGS-3000-10L: 280 mm (W) x 140 mm (D) x 44 mm (H)
DGS-3000-20L: 280 mm (W) 140 mm (D) 44 mm (H)
DGS-3000-28L: 440 mm (W) 210 mm (D) 44 mm (H)
DGS-3000-28LP: 440 mm (W) 210 mm (D) 44 mm (H)