D-Link DGS-3000 series - Port Functions

DGS-3000 Series Gigabit Ethernet Switch Hardware Installation Guide
41
Location
LED Indicative
Color
Status
Description
10/100Mbps.
Off
Light off
No link
PoE Mode
(DGS-3000-28LP
and DGS-3000-
28XMP only)
Green
Solid Light
Power feeding
Amber
Solid Light
Error Condition
Off
Light Off
No Power feeding
LED per SFP Port
(1000Mbps)
Link/Act
Green
Solid Light
When there is a secure connection (or
link) to 1000Mbps Ethernet device at
any of the ports.
Blinking
When there is reception or
transmission of data occurring at
1000Mbps.
Off
Light off
No link
LED per SFP+
Port
(1/10Gbps)
Link/Act
Green
Solid Light
When there is a secure connection (or
link) to 10Gbps Ethernet device at any
of the ports.
Blinking
When there is reception or
transmission (i.e. Activity--Act) of data
occurring at a 10Gbps port.
Amber
Solid Light
When there is a secure connection (or
link) to 1Gbps Ethernet device at any
of the ports.
Blinking
When there is reception or
transmission (i.e. Activity--Act) of data
occurring at a 1Gbps port.
Off
Light off
No link
Port Functions
Feature
Description
Console Port
RJ45 interface for Out-Of-Band (OOB) CLI configuration.
Copper RJ45 Ports
Compliant with the following standards:
 IEEE 802.3 compliance
 IEEE 802.3u compliance
 IEEE 802.3ab compliance
 IEEE 802.3az compliance (100/1000Mbps)
 Auto-negotiation
 Auto MDI/MDIX
 IEEE 802.3x Flow Control support for Full-Duplex mode
 IEEE 802.3af compliance (DGS-3000-28LP and DGS-3000-
28XMP only)
 IEEE 802.3at compliance (DGS-3000-28LP and DGS-3000-
28XMP only)
SFP Ports
Compliant with the following standards:
 IEEE 802.3u compliance (DGS-3000-XS 1-24 ports)
 IEEE 802.3z compliance