D-Link DGS-3000 series - Console Cable; Redundant Power Supply (RPS) Cable

DGS-3000 Series Gigabit Ethernet Switch Hardware Installation Guide
45
Console Cable
When connecting the Switch to a PC, a Console cable is necessary. The following diagrams and tables show the
standard Console-to-RJ45 receptacle/connector and their pin assignments.
Figure B–2 Console-to-RJ45 Cable
Console-to-RJ45 PIN Assignments:
Pin
Console (DB-9/RS-232)
RJ45
1
Not Used
Not Used
2
RXD
Not Used
3
TXD
TXD
4
Not Used
GND
5
GND (shared)
GND
6
Not Used
RXD
7
Not Used
Not Used
8
Not Used
Not Used
Redundant Power Supply (RPS) Cable
When connecting the Switch to an RPS, an RPS cable is necessary. Please review these products for matching cable
pin assignment. The following diagrams and tables show the DPS-CB150-2PS receptacle/connector and their pin
assignments.