D-Link DGS-3000 series - Page 105

DGS-3000 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
101
DGS-3000-26TC:admin#show time_range
Command: show time_range
Time Range Information
-----------------------------
Range Name : 1
Weekdays : Mon
Start Time : 01:01:01
End Time : 02:01:01
Total Entries :1
DGS-3000-26TC:admin#
6-9 show current_config access_profile
Description
This command is used to display the ACL part of the current configuration, when logged in with
user level privileges.
The overall current configuration can be displayed by using the show config command, which is
accessible with administrator level privileges.
Format
show current_config access_profile
Parameters
None.
Restrictions
None.
Example
To display the ACL part of the current configuration: