D-Link DGS-3000 series - Page 17

DGS-3000 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
13
DGS-3000-26TC:admin#logout
Command: logout
**********
* Logout *
**********
DGS-3000-26TC Gigabit Ethernet Switch
Command Line Interface
Firmware: Build 1.00.015
Copyright(C) 2013 D-Link Corporation. All rights reserved.
UserName:
2-8 ?
Description
This command is used to display the usage description for all commands or the specific one.
Format
?
Parameters
None.
Restrictions
None.
Example
To get “ping” command usage, descriptions:
DGS-3000-26TC:admin#? ping
Command: ? ping
Command: ping
Usage: <ipaddr> { times <value 1-255> | timeout <sec 1-99>}
Description: Used to test the connectivity between network devices.
DGS-3000-26TC:admin#
2-9 clear
Description
The command is used to clear screen.