D-Link DGS-3000 series - Page 231

DGS-3000 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
227
DGS-3000-26TC:admin#config name_server timeout 10
Command: config name_server timeout 10
Success.
DGS-3000-26TC:admin#
24-4 show name_server
Description
This command is used to display the current DNS Resolver name servers and name server time
out on the Switch.
Format
show name_server
Parameters
None.
Restrictions
None.
Example
To display the current DNS Resolver name servers and name server time out:
Static Name Server Table:
Server IP Address Priority
------------------------------------------- -----------
10.10.10.10 Primary
10.1.1.1 Secondary
Dynamic Name Server Table:
Server IP Address Priority
------------------------------------------- -----------
10.48.74.122 Primary
DGS-3000-26TC:admin#
24-5 create host_name
Description
This command is used to create the static host name entry of the Switch.
Format
create host_name <name 255> [<ipaddr> | <ipv6addr>]