D-Link DGS-3000 series - Page 25

DGS-3000 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
21
Parameters
ports - Specifies a range of ports to be displayed.
<portlist> - (Optional) Enter the list of ports to be configured.
description - (Optional) Indicates if the port description will be included in the display.
err_disabled - (Optional) Displays ports that were disabled because of an error condidtion.
details - (Optional) Displays the port details.
media_type - (Optional) Displays the port transceiver type.
Restrictions
None.
Example
To display the port details:
DGS-3000-26TC:admin#show ports details
Command: show ports details
Port : 1
--------------------
Port Status : Link Up
Description :
HardWare Type : Fast Ethernet
MAC Address : 00-01-02-03-04-01
Bandwidth : 100000Kbit
Auto-Negotiation : Enabled
Duplex Mode : Full Duplex
Flow Control : Disabled
MDI : Normal
Address Learning : Enabled
Last Clear of Counter : 2 hours 43 mins ago
BPDU Hardware Filtering Mode: Disabled
Queuing Strategy : FIFO
TX Load : 0/100, 0 bits/sec, 0 packets/sec
RX Load : 0/100, 0 bits/sec, 0 packets/sec
CTRL+C ESC q Quit SPACE n Next Page p Previous Page r Refresh