D-Link DGS-3000 series - Page 254

DGS-3000 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
250
29-4 show filter extensive_netbios
Description
This command is used to display the extensive netbios state on the Switch.
Format
show filter extensive_netbios
Parameters
None.
Restrictions
None.
Example
To display the extensive_state created on the Switch:
DGS-3000-26TC:admin#show filter extensive_netbios
Command: show filter extensive_netbios
Enabled ports: 1-3
DGS-3000-26TC:admin#