D-Link DGS-3000 series - Show Ipv6 Route

DGS-3000 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
330
Format
delete ipv6route [default] [<ipif_name 12> <ipv6addr> | <ipv6addr> | all]
Parameters
default - Specifies the default route.
<ipif_name 12> - Enter the IP interface name used here. This name can be up to 12 characters
long.
<ipv6addr> - Specifies the next hop address for the default route.
<ipv6addr> - Specifies the next hop address for the default route.
all - Specifies that all static created routes will be deleted.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
Delete an IPv6 static route:
DGS-3000-26TC:admin#delete ipv6route default System 3FFC::1
Command: delete ipv6route default System 3FFC::1
Success.
DGS-3000-26TC:admin#
36-3 show ipv6route
Description
This command is used to display IPv6 routes.
Format
show ipv6route
Parameters
None.
Restrictions
None.
Example
Show all the IPv6 routes: