D-Link DGS-3000 series - Page 337

DGS-3000 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
333
Format
enable jwac
Parameters
None.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To enable JWAC:
DGS-3000-26TC:admin#enable jwac
Command: enable jwac
Success.
DGS-3000-26TC:admin#
37-2 disable jwac
Description
This command is used to disable JWAC.
Format
disable jwac
Parameters
None.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To disable JWAC: