DGS-3000 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
339
37-10 enable jwac udp_filtering
Description
This command is used to enable the JWAC UDP filtering function. When UDP filtering is enabled,
all UDP and ICMP packets except DHCP and DNS packets from unauthenticated hosts will be
dropped.
Format
enable jwac udp_filtering
Parameters
None.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To enable JWAC UDP filtering:
37-11 disable jwac udp_filtering
Description
This command is used to disable JWAC UDP filtering.
Format
disable jwac udp_filtering
Parameters
None.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
To Next Page
Loading...
