D-Link DGS-3000 series - Page 393

DGS-3000 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
389
Format
show lldp_med
Parameters
None.
Restrictions
None.
Example
To display the Switch’s general LLDP-MED configuration status:
DGS-3000-26TC:admin#show lldp_med
Command: show lldp_med
LLDP-MED System Information:
Device Class : Network Connectivity Device
Hardware Revision : A1
Firmware Revision : 1.00.001
Software Revision : 1.00.015
Serial Number :
Manufacturer Name : D-Link
Model Name : DGS-3000-26TC Gigabit Ethernet S
Asset ID :
LLDP-MED Configuration:
Fast Start Repeat Count : 4
LLDP-MED Log State:Enabled
DGS-3000-26TC:admin#
41-20 show lldp_med local_ports
Description
This command is used to display the per-port LLDP-MED information currently available for
populating outbound LLDP-MED advertisements.
Format
show lldp_med local_ports {<portlist>}
Parameters
<portlist> - (Optional) Specifies a range of ports to be displayed.