D-Link DGS-3000 series - Disable Loopdetect

DGS-3000 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
395
Format
enable loopdetect
Parameters
None.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To enable the LBD function globally:
DGS-3000-26TC:admin#enable loopdetect
Command: enable loopdetect
Success.
DGS-3000-26TC:admin#
42-4 disable loopdetect
Description
This command is used to disable the LBD function globally on the Switch.
Format
disable loopdetect
Parameters
None.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To disable the LBD function globally: