DGS-3000 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
36
Example
To associate secondary vlan to private vlan p1:
DGS-3000-26TC:admin#config private_vlan p1 add community vlanid 3
Command: config private_vlan p1 add community vlanid 3
Success.
3-20 show private_vlan
Description
This command is used to show the private VLAN information.
Format
show private_vlan {[<vlan_name 32> | vlanid<vidlist>]}
Parameters
<vlan_name 32> - (Optional) Specifies the name of the private VLAN or its secondary VLAN.
This name can be up to 32 characters long.
vlanid - (Optional) Specifies the VLAN ID of the private VLAN or its secondary VLAN.
<vidlist> - Enter the VLAN ID used here.
Restrictions
Only Administrators and Operators can issue this command.
Example
To display private VLAN settings:
DGS-3000-26TC:admin#show private_vlan
Command: show private_vlan
Primary VLAN 3
------------------------------------------
Promiscuous Ports :
Trunk Ports :
Total Entries: 1
To Next Page
Loading...
