D-Link DGS-3000 series - Page 42

DGS-3000 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
38
Example
Used to enable the 802.1X function:
DGS-3000-26TC:admin#enable 802.1x
Command: enable 802.1x
Success.
DGS-3000-26TC:admin#
4-2 disable 802.1x
Description
This command is used to disable the 802.1X function.
Format
disable 802.1x
Parameters
None.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To disable the 802.1X function:
DGS-3000-26TC:admin#disable 802.1x
Command: disable 802.1x
Success.
DGS-3000-26TC:admin#
4-3 create 802.1x user
Description
This command is used to create an 802.1X user.
Format
create 802.1x user <username 15>