DGS-3000 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
422
vlan - (Optional) Specifies the VLAN that you would like to display.
<vlan_name 32> - Enter the VLAN name here. This name can be up to 32 characters long.
vlanid - (Optional) Specifies the VLAN by VLAN ID.
<vlanid 1-4094> - Enter the VLAN ID here. This value must be between 1 and 4094.
Restrictions
None.
Example
In the following example, MAC address “00-80-c2-33-c3-45” is assigned to VLAN 300 by manual
config. It is assigned to VLAN 400 by Voice VLAN. Since Voice VLAN has higher priority than
manual configuration, the manual configured entry will become inactive. To display the MAC-
based VLAN entry:
DGS-3000-26TC:admin#show mac_based_vlan
MAC Address VLAN ID Status Type
----------------- ------- -------- -------------------
00-80-e0-14-a7-57 200 Active Static
00-80-c2-33-c3-45 300 Inactive Static
00-80-c2-33-c3-45 400 Active Voice VLAN
Total Entries : 3
To Next Page
Loading...
