D-Link DGS-3000 series - Enable Mirror; Disable Mirror

DGS-3000 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
424
46-2 enable mirror
Description
This command is used to enable mirror function without having to modify the mirror session
configuration.
Format
enable mirror
Parameters
None.
Restrictions
Only Administrators and Operators can issue this command.
Example
To enable mirroring function:
DGS-3000-26TC:admin#enable mirror
Command: enable mirror
Success.
DGS-3000-26TC:admin#
46-3 disable mirror
Description
This command is used to disable mirror function without having to modify the mirror session
configuration.
Format
disable mirror
Parameters
None.
Restrictions
Only Administrators and Operators can issue this command.