D-Link DGS-3000 series - Chapter 53 Network Monitoring Command List

DGS-3000 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
497
Chapter 53 Network Monitoring
Command List
show packet ports <portlist>
show error ports <portlist>
show utilization [cpu | ports]
show utilization dram
show utilization flash
clear counters {ports <portlist>}
53-1 show packet ports
Description
This command is used to display statistics about the packets sent and received by the Switch.
Format
show packet ports <portlist>
Parameters
<portlist> - Specifies a range of ports to be displayed.
Restrictions
None.
Example
To display the packets analysis for port 7: