D-Link DGS-3000 series - Chapter 5 Access Authentication Control Command List

DGS-3000 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
55
Chapter 5 Access Authentication
Control Command List
enable password encryption
disable password encryption
enable authen_policy
disable authen_policy
show authen_policy
create authen_login method_list_name <string 15>
config authen_login [default | method_list_name <string 15>] method {tacacs | xtacacs | tacacs+
| radius | server_group <string 15> | local | none}
delete authen_login method_list_name <string 15>
show authen_login [default | method_list_name <string 15> | all]
create authen_enable method_list_name <string 15>
config authen_enable [default | method_list_name <string 15>] method {tacacs | xtacacs |
tacacs+ | radius | server_group <string 15> | local _enable | none}
delete authen_enable method_list_name <string 15>
show authen_enable [default | method_list_name <string 15> | all]
config authen application [console | telnet | ssh | http | all] [login | enable] [default |
method_list_name <string 15>]
show authen application
create authen server_group <string 15>
config authen server_group [tacacs | xtacacs | tacacs+ | radius | <string 15>] [add | delete]
server_host [<ipaddr> | ipv6 <ipv6addr> ] protocol [tacacs | xtacacs | tacacs+ | radius]
delete authen server_group <string 15>
show authen server_group {<string 15>}
create authen server_host [<ipaddr> | ipv6 <ipv6addr>] protocol [tacacs | xtacacs | tacacs+ |
radius] {port <int 1-65535> | [key [<key_string 254> | none]] | timeout <int 1-255> | retransmit
<int 1-20>}
config authen server_host [<ipaddr> | ipv6 <ipv6addr>] protocol [tacacs | xtacacs | tacacs+ |
radius] {port <int 1-65535> | [ key [<key_string 254> | none] ] | timeout <int 1-255> | retransmit
<int 1-20>}
delete authen server_host [<ipaddr> | ipv6 <ipv6addr>] protocol [tacacs | xtacacs | tacacs+ |
radius]
show authen server_host
config authen parameter response_timeout <int 0-255>
config authen parameter attempt <int 1-255>
show authen parameter
enable admin
config admin local_enable {encrypt [plain_text | sha_1] <password>}
create accounting method_list_name <string 15>
config accounting [default | method_list_name <string 15>] method {tacacs+ | radius |
server_group <string 15> | none}
delete accounting method_list_name <string 15>
show accounting [default | method_list_name <string 15> | all]
config accounting service command {administrator | operator | power_user | user}
[method_list_name <string> | none]
config accounting service [network | shell | system] state [enable {[radius_only |
method_list_name <string 15> | default_method_list]} | disable]
show accounting service
show aaa