DGS-3000 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
586
DGS-3000-26TC:admin#download ssl certificate 10.55.47.1 certfilename cert.der
keyfilename pkey.der
Command: download ssl certificate 10.55.47.1 certfilename cert.der keyfilename
pkey.der
Certificate Loaded Successfully!
66-2 enable ssl
Description
This command is used to enable SSL status and it’s ciphersuites. Using “enable ssl” command will
enable SSL feature which means enable SSLv3 and TLSv1. For each ciphersuites, user must
specify it by this command.
Format
enable ssl {ciphersuite {RSA_with_RC4_128_MD5 | RSA_with_3DES_EDE_CBC_SHA |
DHE_DSS_with_3DES_EDE_CBC_SHA | RSA_EXPORT_with_RC4_40_MD5}}
Parameters
ciphersuite - (Optional) Specifies the cipher suite combination used for this configuration.
RSA_with_RC4_128_MD5 - Indicates RSA key exchange with RC4 128 bits encryption and
MD5 hash.
RSA_with_3DES_EDE_CBC_SHA - Indicates RSA key exchange with 3DES_EDE_CBC
encryption and SHA hash.
DHE_DSS_with_3DES_EDE_CBC_SHA - Indicates DH key exchange with 3DES_EDE_CBC
encryption and SHA hash.
RSA_EXPORT_with_RC4_40_MD5 - Indicates RSA_EXPORT key exchange with RC4 40
bits encryption and MD5 hash.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To enable the SSL ciphersuite for RSA_with_RC4_128_MD5:
DGS-3000-26TC:admin#enable ssl ciphersuite RSA_with_RC4_128_MD5
Command: enable ssl ciphersuite RSA_with_RC4_128_MD5
Success.
To Next Page
Loading...
