D-Link DGS-3000 series - Show Snmp Community

DGS-3000 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
601
Format
delete snmp community <community_string 32>
Parameters
community - Specifies that the community string will be deleted.
<community_string 32> - Enter the community string value here. This value can be up to 32
characters long.
Restrictions
Only Administrators can issue this command.
Example
To delete a SNMP community “System”:
DGS-3000-26TC:admin#delete snmp community System
Command: delete snmp community System
Success.
DGS-3000-26TC:admin#
69-3 show snmp community
Description
This command is used to display the community string configurations.
Format
show snmp community <community_string 32>
Parameters
<community_string 32> - (Optional) Specifies the Community string.
If no parameter is specified, all community string information will be displayed.
Restrictions
None.
Example
To display SNMP community: