D-Link DGS-3000 series - Page 664

DGS-3000 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
660
DGS-3000-26TC:admin#upload attack_log_toTFTP 10.90.90.10 dest_file
d:\attack.txt
Command: upload attack_log_toTFTP 10.90.90.10 dest_file d:\attack.txt
Success.
DGS-3000-26TC:admin#
75-3 config tftp
Description
This command is used to pre-configure TFTP server and file pathname on the TFTP server.
Format
config tftp {server <ipaddr> | firmware_file <path_filename 64> | cfg_file <path_filename 64>
| log_file <path_filename 64> | attack_log_file <path_filename 64> | certificate_file
<path_filename 64> | key_file <path_filename 64> | tech_support_file <path_filename 64> |
debug_error_log_file <path_filename 64> | sim_firmware_file <path_filename 64> |
sim_cfg_file <path_filename 64> | sim_log_file <path_filename 64>}
Parameters
server - (Optional) Specifies the IP address of the TFTP server.
<ipaddr> - The IP address of the TFTP server.
firmware_file - (Optional) Specifies the pathname supports “download/upload
firmware_fromTFTP” function.
<path_filename 64> - Specifies the pathname supports “download/upload
firmware_fromTFTP” function.
cfg_file - (Optional) Specifies the pathname supports “download/upload cfg_fromTFTP” function.
<path_filename 64> - Specifies the pathname supports “download/upload cfg_fromTFTP”
function.
log_file - (Optional) Specifies the pathname supports “upload log_toTFTP” function.
<path_filename 64> - Specifies the pathname supports “upload log_toTFTP” function.
attack_log_file - (Optional) Specifies the pathname supports “upload attack_log_toTFTP”
function.
<path_filename 64> - Specifies the pathname supports “upload attack_log_toTFTP” function.
certificate_file - (Optional) Specifies the pathname supports “download ssl certificate” function.
<path_filename 64> - Specifies the pathname supports “download ssl certificate” function.
key_file - (Optional) Specifies the pathname supports “download ssl certificate” function.
<path_filename 64> - Specifies the pathname supports “download ssl certificate” function.
tech_support_file - (Optional) Specifies specifying the pathname supports “upload
tech_support_toTFTP” function.
<path_filename 64> - Specifies specifying the pathname supports “upload
tech_support_toTFTP” function.
debug_error_log_file - (Optional) Specifies the pathname supports “debug error_log” function.
<path_filename 64> - Specifies the pathname supports “debug error_log” function.
sim_firmware_file - (Optional) Specifies the pathname supports “download/upload sim_ms
firmware_fromTFTP” function.
<path_filename 64> - Specifies the pathname supports “download/upload sim_ms
firmware_fromTFTP” function.
sim_cfg_file - (Optional) Specifies the pathname supports “downloa/upload sim_ms
configuration_fromTFTP” function.
<path_filename 64> - Specifies the pathname supports “downloa/upload sim_ms
configuration_fromTFTP” function.