EasyManua.ls Logo

D-Link DGS-3000 series - Page 719

D-Link DGS-3000 series
731 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
DGS-3000 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
715
Multicast storm occurrence
Port <portNum> Multicast storm is
occurring
Warning
Multicast storm cleared
Port <portNum> Multicast storm has
cleared
Informational
Port shut down due to a packet storm
Port <portNum> is currently shut
down due to a packet storm
Warning
Loop Back
Detection
Port loop occurred
Port <portNum> LBD loop occurred.
Port blocked.
Critical
Port loop detection restarted after
interval time
Port <portNum> LBD port recovered.
Loop detection restarted.
Informational
Port with VID loop occurred
Port <portNum> VID <vlanID> LBD
loop occurred. Packet discard begun.
Critical
Port with VID Loop detection restarted
after interval time
Port <portNum> VID <vlanID> LBD
recovered. Loop detection restarted.
Informational
802.1x
VID assigned from radius server after
radius client authenticated by radius
server successfully .This VID will
assign to the port and this port will be
the vlan untag port member.
Radius server <ipaddr> assigned
vid :<vlanID> to port <portNum>
(account :<username> )
Informational
Ingress bandwidth assigned from
radius server after radius client
authenticated by radius server
successfully .This Ingress bandwidth
will assign to the port.
Radius server <ipaddr> assigned
ingress bandwith :<ingressBandwidth>
to port <portNum> (account :
<username>)
Informational
Egress bandwidth assigned from
radius server after radius client
authenticated by radius server
successfully .This egress bandwidth
will assign to the port.
Radius server <ipaddr> assigned
egress bandwith :<egressBandwidth>
to port <portNum> (account:
<username>)
Informational
802.1p default priority assigned from
radius server after radius client
authenticated by radius server
successfully. This 802.1p default
priority will assign to the port.
Radius server <ipaddr> assigned
802.1p deafult priority:<priority> to
port <portNum> (account :
<username>)
Informational
802.1x Authentication failure
802.1x Authentication failure from
(Username: <username>, Port:
<portNum>, MAC: <macaddr> )
Warning
802.1x Authentication success
802.1x Authentication success [for
<reason> ] from (Username:
<username>, Port: <portNum>, MAC:
<macaddr>)
Informational
CFM
Cross-connect is detected
CFM cross-connect. VLAN:<vlanid>,
Local(MD Level:<mdlevel>, Port
<portNum>, Direction:<mepdirection>)
Remote(MEPID:<mepid>,
MAC:<macaddr>)
Critical
Error CFM CCM packet is detected
CFM error ccm. MD Level:<mdlevel>,
VLAN:<vlanid>, Local(Port
<portNum>, Direction:<mepdirection>)
Remote(MEPID:<mepid>,
MAC:<macaddr>)
Warning
Can not receive remote MEP's CCM
packet
CFM remote down. MD
Level:<mdlevel>, VLAN:<vlanid>,
Local(Port <portNum>,
Direction:<mepdirection>)
Warning

Table of Contents

Other manuals for D-Link DGS-3000 series

Related product manuals