D-Link DGS-3000 series - Page 720

DGS-3000 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
716
Remote MEP's MAC reports an error
status
CFM remote MAC error. MD
Level:<mdlevel>, VLAN:<vlanid>,
Local(Port <portNum>,
Direction:<mepdirection>)
Warning
Remote MEP detects CFM defects
CFM remote detects a defect. MD
Level:<mdlevel>, VLAN:<vlanid>,
Local(Port <portNum>,
Direction:<mepdirection>)
Informational
ARP
Gratuituios ARP detected duplicate
IP.
Conflict IP was detected with this
device ! (IP: <ipaddr>, MAC:
<macaddr>, Port <portNum>,
Interface: <ipif_name>).
Warning
DHCP
Detect untrusted DHCP server IP
address
Detected untrusted DHCP server(IP:
<ipaddr>, Port: <portNum>)
Informational
COMMAND
LOGGING
Command Logging
<username>: execute command
"<string>"
Informational
MBAC
A host passes the authentication
MAC-based Access Control host login
successful (MAC: <macaddr>, port:
<[unitID]portNum>, VID: <vid>)
Informational
A host fails to pass the authentication
MAC-based Access Control
unauthenticated host(MAC:
<macaddr>, Port <[unitID:]portNum>,
VID: <vid>)
Critical
A host is aged out
MAC-based Access Control host aged
out (MAC: <macaddr>, port:
<[unitID]portNum>, VID: <vid>)
Informational
The authorized user number on a port
reaches the maximum user limit
Port <portNum> enters MAC-based
Access Control stop learning state
Warning
The authorized user number on a port
is below the maximum user limit in a
time interval (interval is project
depended)
Port <portNum> recovers from MAC-
based Access Control stop learning
state
Warning
The authorized user number on whole
device reaches the maximum user
limit
MAC-based Access Control enters
stop learning state
Warning
The authorized user number on whole
device is below the maximum user
limit in a time interval (interval is
project depended)
MAC-based Access Control recovers
from stop learning state
Warning
BPDU
Protection
BPDU attack happened
Port <port> enter BPDU under
protection state (mode: drop )
Informational
BPDU attack happened
Port <port> enter BPDU under
protection state (mode: block)
Informational
BPDU attack happened
Port <port> enter BPDU under
protection state (mode: shutdown)
Informational
BPDU attack automatically recover
Port <port> recover from BPDU under
protection state automatically
Informational
BPDU attack manually recover
Port <port> recover from BPDU under
protection state manually
Informational
System re-start reason: system fatal
error
System re-start reason: system fatal
error
Emergent
System re-start reason: CPU
exception
System re-start reason: CPU
exception
Emergent