DGS-3100 Series Gigabit Stackable Managed Switch User Manual
The DLF Filtering Mode Page contains the following fields:
Field Description
Unit
Defines the stacking unit number to specify a port range, or LAG to specify a LAG range.
From Port or From LAG Defines the first port or LAG in a consecutive sequence of ports or LAGs.
To Port or To LAG Defines the last port or LAG in a consecutive sequence of ports or LAGs.
All
Specifies that the filtering mode applies to all ports or LAGs.
Filtering Mode
Defines the DLF filtering mode for unregistered Multicast groups. The possible field
values are:
Filter DLF Packets — Prevents DLF Packets flooding..
Forward DLF Packets — Floods DLF packets within the network. This is the default
mode.
2. Define the Unit and Filtering Mode fields.
3. Select either All or specify a port (LAG) range in the From Port (From LAG) and To Port (To LAG) fields.
4. Click
.The DLF filtering settings are applied to the ports (LAGs), and the device is updated.
109
To Next Page
Loading...
