D-Link DGS-3120-24PC - Page 253

xStack
®
DGS-3120 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
249
<desc 32> - Enter the user defined description here. This value can be up to 32 characters
long.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To configure dhcp_relay option 82:
DGS-3120-24TC:admin# config dhcp_relay option_82 state enable
Command: config dhcp_relay option_82 state enable
Success.
DGS-3120-24TC:admin# config dhcp_relay option_82 check disable
Command: config dhcp_relay option_82 check disable
Success.
DGS-3120-24TC:admin# config dhcp_relay option_82 policy replace
Command: config dhcp_relay option_82 policy replace
Success.
DGS-3120-24TC:admin# config dhcp_relay option_82 remote_id user_define “D-Link
L2 Switch”
Command: config dhcp_relay option_82 remote_id user_define "D-Link L2 Switch"
Success.
DGS-3120-24TC:admin#
24-7 enable dhcp_relay
Description
This command is used to enable the DHCP relay function on the Switch.
Format
enable dhcp_relay
Parameters
None.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.