D-Link DGS-3120-24PC - Chapter 26 Dhcpv6 Relay Command List (EI Mode Only)

xStack
®
DGS-3120 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
265
Chapter 26 DHCPv6 Relay Command
List (EI Mode Only)
enable dhcpv6_relay
disable dhcpv6_relay
config dhcpv6_relay [add|delete] ipif <ipif_name 12> <ipv6addr>
config dhcpv6_relay hop_count <value 1-32>
config dhcpv6_relay ipif [<ipif_name 12> | all] state [enable | disable]
show dhcpv6_relay {ipif <ipif_name 12>}
26-1 enable dhcpv6_relay
Description
This command is used to enable the DHCPv6 relay function on the Switch.
Format
enable dhcpv6_relay
Parameters
None.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To configure the DHCPv6 relay global state to enable:
DGS-3120-24TC:admin#enable dhcpv6_relay
Command: enable dhcpv6_relay
Success.
DGS-3120-24TC:admin#
26-2 disable dhcpv6_relay
Description
This command is used to disable the DHCPv6 relay function on the Switch.
Format
disable dhcpv6_relay