D-Link DGS-3120-24PC - Page 464

xStack
®
DGS-3120 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
460
Example
To show the Switch’s Mac address table notification global settings:
DGS-3120-24TC:admin# show mac_notification
Command: show mac_notification
Global Mac Notification Settings
State : Enabled
Interval : 1
History Size : 500
DGS-3120-24TC:admin#
45-6 show mac_notification ports
Description
This command is used to display the port’s Mac address table notification status settings.
Format
show mac_notification ports {<portlist>}
Parameters
<portlist> - (Optional) Enter a list of ports used for the configuration here.
Restrictions
None.
Example
To display all port’s Mac address table notification status settings: