xStack
®
DGS-3120 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
70
methods like tacacs/xtacacs/tacacs+/radius built-in or user-defined server groups or none, the
“user” privilege level is assigned only. If user wants to get admin privilege level, user must use the
“enable admin” command to promote his privilege level. But when local method is used, the
privilege level will depend on this account privilege level stored in the local device.
Format
config authen_login [default | method_list_name <string 15>] method {tacacs | xtacacs |
tacacs+ | radius | server_group <string 15> | local | none}
Parameters
default - The default method list of authentication methods.
method_list_name - The user-defined method list of authentication methods.
<string 15> - Enter the method list name here. This value can be up to 15 characters long.
method - Specify the authentication method used.
tacacs - (Optional) Authentication by the built-in server group “tacacs”.
xtacacs - (Optional) Authentication by the built-in server group “xtacacs”.
tacacs+ - (Optional) Authentication by the built-in server group “tacacs+”.
radius - (Optional) Authentication by the built-in server group “radius”.
server_group - (Optional) Authentication by the user-defined server group.
<string 15> - Enter the server group value here. This value can be up 15 characters long.
local - (Optional) Authentication by local user account database in device.
none - (Optional) No authentication.
Restrictions
Only Administrator-level users can issue this command.
Example
To configure a user-defined method list for user login:
DGS-3120-24TC:admin# config authen_login method_list_name login_list_1 method
tacacs+ tacacs local
Command: config authen_login method_list_name login_list_1 method tacacs+
tacacs local
Success.
5-10 delete authen_login
Description
This command is used to delete a user-defined method list of authentication methods for user login.
Format
delete authen_login method_list_name <string 15>
To Next Page
Loading...
