D-Link DGS-3120-24PC - Page 841

xStack
®
DGS-3120 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
837
SD Card
Management
Execute configuration
error.
Error when execute configuration
<filename> line:<lineno> at time
< time-range>.
Warning
Schedule backup fail.
Backup <type>:<filename> at
time <time-range> failure.
Warning
Execute configuration
success.
Execute configuration
<filename> success at time <
time-range>.
Informational
Schedule backup
success.
Backup <type>:<filename>
success at time <time-range>.
Informational
LLDP
LLDP-MED Topology
change detected
LLDP-MED Topology change
detected (on port %d. chassis id:
%d, %s, port id: %d, %s, device
class: %d)
notice
Conflict LLDP-MED
device type detected
Conflict LLDP-MED device type
detected (on port %d. chassis id:
%d, %s, port id: %d, %s, device
class: %d)
notice
Incompatible LLDP-MED
TLV set detected
Incompatible LLDP-MED TLV set
detected (on port %d. chassis id:
%d, %s, port id: %d, %s, device
class: %d)
notice
Surveillance
VLAN
When a new surveillance
device is detected in the
port
New surveillance device
detected (Port <portNum>, MAC
<macaddr>)
Informational
When a port which is
enabled surveillance
VLAN joins the
surveillance VLAN
automatically.
Port < portNum > add into
surveillance VLAN <vid >
Informational
When a port leaves the
surveillance VLAN and at
the same time, no
surveillance device is
detected in the aging
interval for that port, the
log message will be sent.
Port < portNum > remove from
surveillance VLAN <vid >
Informational